OE ProTune v3.1.5

This is an application for setting up an ECU in BeamNG. Works on almost any car, with any engine or turbine. Built on the principle of a real chip tuning stand, but the main goal is training. Changes in fuel, ignition, boost and lambda tables directly affect engine performance. With the correct setting, you get an increase in power, with errors — detonation, missed ignition or even engine destruction. Since this is a simulator, you can experiment without risk, and resetting the car will instantly return everything to normal.

Setting is carried out on real tables. Color-coded fuel, ignition, boost and lambda tables are available. You can select groups of cells, change them by adding, subtracting, scaling as a percentage, filling, smoothing, interpolation, copying and pasting. Base and difference map display modes are available, the active cell shows the current position of the engine on the map, as well as a three-dimensional table view.

The real-time page displays all engine operating parameters: lambda, detonation, injector duty cycle, fuel pressure, intake temperature and engine status, with alarms for deviations.

The built-in dynamometer allows you to evaluate the setup results. Once you have made the measurement, you get the power and torque curves, and the first measurement is stored as a basis for comparison with the subsequent ones.

The «Learning /Lessons» button launches a step-by-step guide. The car is configured for the lesson, a sequence of actions is shown explaining each step. There are 8 lessons available from beginner to advanced level:

- Reading instrument readings
- Fuel-rich mixture fix
- Power and detonation
- Power setting on the dynostand
- Additional ways to increase power (mixture composition, valve timing, boost)
- Setting up a two-stage limiter for starting
- Supercharging setting on turbocharged vehicle
- Creating a safe setting with the turbine

The «Help» button analyzes current data and the results of the latest measurements, provides clear recommendations for eliminating problems: depletion at high speeds, exceeding the target boost pressure, engine damage. If a problem is detected, you will be redirected to the desired page to fix it.

Russian translation: Russian language has been added throughout the application and remote interfaces.